uPrecisionMic

Description

NEW – uPrecisionMic is a complete redesign of our precision Lightning Connector microphone.

uPrecisionMic is a USB-C connected precision test and measurement microphone that meets ANSI and IEC electrical and acoustic Class 1 standards. It works with iPhone 15, all USB-C iPads, Windows PCs, Apple Macs, and Android devices. It can also be used on Lightning-equipped Apple products using the Apple Camera Connection Kit.

uPrecisionMic is factory calibrated to +/-0.1dB using a NIST traceable pressure-compensated calibrator. The calibration factor for both high and low ranges are recording on the factory calibration card in dBFS, so that application software can be calibrated to provide an absolute SPL level. The calibration is automatically read by the AudioTools app when you plug it into a USB-C equipped iOS device, or a Lightning device when using the Apple Camera Connection Kit.

The uPrecisionMic body is built of beautifully finished nickel-plated solid bronze tubing that is threaded to accept a standard 1/2” microphone capsule.

All of the active electronics are in the microphone body, including the microphone preamplifier using a 5 gigaOhm input impedance resistor, precision 24-bit A/D converter, and the logic circuitry required to communicate over a USB digital audio link.

uPrecisionMic connects to the USB host device with a USB type C connector using a 1m (39”) cable. If your device does not have a USB-C connection available, you can use the included USB-C to USB-A adapter.

Included in the box:

• uPrecisionMic
• Standard windscreen
• Mic clip
• USB-C to USB-A adapter
• Calibration curve chart
• Calibration card for AudioTools
• Foam-lined carry case
• For more information about using uPrecisionMic, see our page on iPrecisionMic. uPrecisionMic is essentially iPrecisionMic redesigned to connect to USB-C devices.